Shandong Dongfang Huachen Intelligent Parking Equipment Co., Ltd

Hydraulic Type Vs. Motor Type

The majority of parking stackers use hydraulic drive over motor drive. There are several reasons we have made this choice.

(1)The car lifts can have a larger loading capacity by using a hydraulic system.

The hydraulic transmission uses the pressure of the hydraulic oil to transmit force. The pumps can obtain high pressure.

 

(2) sizeable power-to-weight ratio

The power-to-weight ratio is the ratio of the output power to its weight. For example, the importance of the hydraulic pump on the aircraft is only 0.209kg per KW of power, while the weight of the motor will reach 2kg per KW. Because the power packs are usually mounted on the lifts, it requires as little weight as possible.

 

(3) Easy to do the reciprocating movement.

Car stackers only move vertically. The hydraulic drive is designed to do reciprocating movement, and the motor must be through the gears, chains, and racks to turn the rotary motion into a linear reciprocating movement.

 

(4) The movement of hydraulic is more smooth and stable

Because the hydraulic fluid can be controlled evenly at minimal flow rates, the speed of motion of the lift can be very soft.

 

(5) Easy to prevent overload

The pressure valve in a hydraulic transmission setting can be used to control the system's pressure and prevent overload and accidents. A pressure gauge can also be installed in the system to monitor load size and working conditions.

 

(6) Components are lubricated automatically, resulting in long service life.

Hydraulic oils create a lubricating effect on the hydraulic components. This allows the parts to have self-lubrication properties and extends their lifespan.

 

(7) The temperature of the surroundings impacts the parking system's performance.

Because of the nature of the oils, the environmental temperature should not be either too high or too low. For the motor type, the user should not be worried about it.

 

(8) The noise of the motor type is lower than the hydraulic pump in general. The motor drive should be considered if the environments are very noise sensitive.

A typical parking stacker consists of three major parts: primary structure, power system, and control system.

You Might Also Like

Send Inquiry